What Platinum “R” Floor Brings to a New South Wales Build
On a suspended floor the subfloor is one of the few places left to add thermal performance once the glazing and the orientation are settled, and in New South Wales every new home has an energy rating to meet. Building the insulation into the structural layer means it is there from the day the floor goes down.
- Insulation that is part of the floor. The core is inside every panel, so the NSW energy rating isn’t relying on batts fitted later under the house, the same principle behind floors that build the insulation in.
- A panel for each climate. R1.2, R1.5, R2.0 and R2.5, which matters across a state running from warm coast to cold tablelands.
- One stage, not two. The floor is sheeted and insulated at once, with the panel specified to the job’s thermal target.
- Set downs with level joists. (rest unchanged) A fibre cement flashing strip between the panel and the wet area flooring creates the wet area set down, so there is no notching or dropping of joists.
- Made to one tolerance. Every panel is made with the same factory-to-floor precision, so a quote for a Newcastle job and one for an Albury job describe the same product.
Queensland-Made Panels for Every Region of New South Wales
Platinum “R” Floor is made in Queensland and travels south to builders from the Tweed to the Riverina. Every panel carries the same specification and the same certifications, so a job in Albury gets the same panel as a job in Logan.
The panels are 100% Australian made and certified by Australian Made Campaign Limited. The timber carries Responsible Wood Chain of Custody certification under AS 4708, endorsed internationally through PEFC. With no imported stock in the supply chain, a New South Wales certifier sees the same paperwork a Queensland one does.
Freight to New South Wales is quoted job by job, because a delivery to Tweed Heads and one to Wagga Wagga are different trips. Talk to the team when you are pricing the floor and they will confirm both for your site, along with anything you need to know about unloading. Panels come in standard sheet sizes, and per the builder feedback published on the Platinum “R” Floor product page, a 64mm sheet is comfortably handled by two people.
07 3803 7488
Cold Country
Through the tablelands, the Southern Highlands and the Snowy Mountains, heat lost downward through an uninsulated suspended floor is lost for the whole season, and the thicker panels are specified for exactly this.
Reactive Ground and Sloping Sites
Reactive clay is common through western Sydney, the Hunter and parts of the Riverina, and a suspended floor over standard framing is one of the usual answers, with joist size and spacing set by the project engineer whether the frame is timber or steel.
Elevated and Flood-Affected Builds
Platinum “R” Floor is regularly specified for elevated and multi-storey homes, which matters on the Northern Rivers and the Hawkesbury-Nepean floodplain where elevated construction is common.
Bathrooms, Laundries and Upper Floors
The panel suits bathrooms, laundries and upper-level floors as readily as ground-level suspended floors, so one product covers the whole floor plan.
Modular, Transportable and Prefabricated
Regional New South Wales is a strong market for transportable and modular housing, and a factory-cut panel suits factory-based assembly.
Bushfire-Prone Land
Much of regional NSW is mapped as bush fire prone, and subfloor enclosure and materials form part of a bushfire assessment, so contact the Platinum Timber & Ply team about specifying Platinum “R” Floor for your site’s rating and your certifier’s requirements.
Frequently Asked Questions
Yes. Platinum “R” Floor is manufactured in Queensland by Platinum Timber & Ply and supplied Australia wide, including every building region in New South Wales from the Tweed to the Riverina. There is no separate NSW product and no imported substitute, so a NSW builder receives the same certified panel as a Queensland one. Contact the Platinum Timber & Ply team with your site address and panel quantity and they will confirm freight and timing.
Yes. Platinum “R” Floor is made in Queensland and is 100% Australian made, certified by Australian Made Campaign Limited. The panels are built from Australian production structural plywood skins over an Australian manufactured foam core, and the timber carries Responsible Wood Chain of Custody certification under AS 4708. Because the supply chain is domestic rather than reliant on imported panel stock, the certification and the specification are the same wherever the panels are delivered.
Freight and delivery timing are confirmed per project, because both depend on how much panel the job needs and where it is going. A Tweed Heads delivery and a Wagga Wagga delivery are not the same job, so Platinum Timber & Ply confirms the arrangement for your site rather than publishing a flat figure. Ask the team when you are pricing the floor and they will sort it out with your panel quote.
Platinum “R” Floor comes in four thicknesses, rated R1.2 (54mm), R1.5 (64mm), R2.0 (84mm) and R2.5 (99mm). New South Wales runs from warm coast to cold tableland and alpine country, so the right panel for a Sydney build is not necessarily the right one for the Snowy Mountains. Your energy assessor sets the target and the Platinum Timber & Ply team can match a panel to it.
Yes. Platinum “R” Floor runs straight through wet areas: a fibre cement flashing strip between the panel and the wet area flooring forms the set down, and the joists stay level. That means bathrooms, laundries and kitchens are handled with the same panel as the rest of the floor plan, which is one of the reasons Platinum Timber & Ply sees it specified across whole builds rather than in isolated areas.
Yes. Platinum “R” Floor is available H2 termite treated, and the treated panels can be used throughout Australia with no restriction by geographical location, and the thicker R2.0 and R2.5 panels are there precisely for the cold tableland and alpine country through the Southern Highlands and the Snowy Mountains. Platinum Timber & Ply supplies regional New South Wales on the same project-by-project basis as the capital cities, so contact the team with your delivery point.
