Why Gold Coast Builders Specify Platinum “R” Floor
Gold Coast work swings between quick-turnaround estate homes in the north, raised houses on hinterland slopes and architect-designed homes on narrow coastal lots. Platinum “R” Floor gives each of them the same floor build-up:
- Floor and insulation in one stage: the sheet goes down with the insulation already in it, so no trade has to come back to fit underfloor batts.
- Two-person handling: a 64mm panel weighs 41.9kg, and builders report carrying and placing each sheet with two people.
- Wet areas without dropped joists: a fibre cement flashing strip beside the 19mm wet area sheet forms the step down, so bathroom and laundry joists stay at one height.
- Australian made and certified: certified by Australian Made Campaign Limited and backed by Responsible Wood certification.
A Hinterland Home at Worongary
Worongary sits in the Gold Coast hinterland west of the M1, where residential streets give way to acreage along the ridges. Platinum “R” Floor went into a contemporary family home there, one of the recent residential builds we have supplied across South East Queensland. The builder reported two results worth knowing for a family home:
- The panel’s acoustic properties improved privacy and comfort between the living zones.
- The lightweight sheets made handling easier for a smaller crew.
Both are among the reasons residential builders rely on Platinum “R” Floor.
Tallai and Mudgeeraba, either side of Worongary, have the same mix of sloping residential blocks and ridge acreage, and the floor build-up carries straight across to them.
07 3803 7488
Built for Gold Coast Sites
Platinum “R” Floor works over timber or steel floor framing, so it follows the design rather than dictating it. On the Gold Coast that covers:
- Estate homes in the northern growth suburbs: double-storey designs in Coomera, Pimpama and Ormeau, where the upper floor is laid and insulated in one pass.
- Hinterland and sloping blocks: suspended floors at Worongary, Tallai and Mudgeeraba, where the panel sits over framing that follows the fall of the land.
- Coastal and canal-front homes: raised floors on lots from Burleigh Heads to Broadbeach Waters, with an H2 treated panel available where termite protection is specified.
- Modular and off-site builds: panels for builders and manufacturers assembling homes off site, who need a floor that arrives as one consistent product.
Frequently Asked Questions
Platinum Timber & Ply is based at 5 Aliciajay Circuit, Luscombe, within the City of Gold Coast and between Brisbane and the coast. Platinum “R” Floor for Gold Coast projects is supplied from there, with supply and timing confirmed per project when the team quotes from your plans.
Yes. Platinum “R” Floor was used in a contemporary family home at Worongary in the Gold Coast hinterland. The builder noted better privacy between the living zones and easier handling for a smaller crew, and it is one of several South East Queensland homes built on the panel.
Platinum “R” Floor comes in 54, 64, 84 and 99mm, rated R1.2, R1.5, R2.0 and R2.5. The right panel depends on the home’s energy assessment, so confirm the target with your energy assessor or certifier and the Platinum Timber & Ply team will match a thickness to it.
With Platinum “R” Floor the joists stay at one height. A strip of fibre cement flashing goes between the edge of the panel and the 19mm wet area sheet, which forms the step down and allows a fall to the waste before waterproofing to the relevant standard.
Yes. Platinum “R” Floor comes untreated or H2 treated, and the termite treated panels can be used anywhere in Australia with no restriction on location. Ask the Platinum Timber & Ply team which option suits your Gold Coast project when you request a quote.
Yes. Platinum Timber & Ply supplies builders in Brisbane, Logan, the Scenic Rim and the Sunshine Coast, and across the border into New South Wales, where the panel went into a home at Banora Point. Delivery is available nationally.
